Bi-Metal Hex Flange Torx Self-Tapping Screws for Thin Sheet Metal (M6 x 25)
Premium bi-metal fastener designed for Solar PV Mounting. Features an advanced dual-drive system (Hex Flange + Torx) for high-torque, cam-out-free installation.
Product Overview
The M6 × 25 mm Bi-Metal Hex Flange Torx Self-Tapping Screw is a premium mechanical fixing solution engineered specifically for high-stress outdoor applications, such as solar panel mounting systems and trapezoidal metal roofs.
Manufactured using advanced bi-metal fusion technology, this fastener seamlessly combines an Austenitic AISI 304 (A2) stainless steel body with a hardened 420/435 carbon steel drill tip (Surface Hardness >507 HV). The stainless steel body guarantees lifetime corrosion immunity against coastal environments and industrial pollutants. Meanwhile, the ultra-hard drill point maximizes on-site efficiency, piercing cold-formed steel decks in an astonishing 0.48 to 0.85 seconds—far exceeding the industry standard of 3 seconds.
Designed to withstand extreme environmental forces, laboratory testing confirms this screw delivers an exceptional Shear Strength of over 12,700 N, providing superior wind-uplift resistance. Furthermore, the innovative Hexagon and Torx dual-drive head ensures zero cam-out and maximum torque transmission, allowing for precise seating of the EPDM washer to guarantee a permanent, watertight seal without stripping.
Performance Demonstration (Lab Test)
Watch our Bi-Metal Self-Tapping Screw pierce through a 1.6mm steel plate in under 1 second. Engineered for ultimate on-site efficiency.
Technical Specifications
| Product Model | M6 × 25 mm |
| Material Build | A2 (SUS304) / A4 (SUS316) Stainless Steel + 420/435 Hardened Carbon Steel Tip |
| Drive Type | 8mm Hex Socket + Torx (Across Flats: 7.84-7.92mm) |
| Flange Diameter | 10.5 – 10.8 mm (Optimized for standard EPDM washers) |
| Max Drilling Capacity | Up to 1.6 mm (Steel / Aluminum Substructure) |
| Drilling Time (Lab Tested) | 0.48 – 0.85s (Standard requirement: ≤ 3s) |
| Shear Strength | 12,741 – 12,992 N (Standard requirement: ≥ 8500 N) |
| Torsional Strength | 15.2 – 21.5 Kg-cm |
| Surface Hardness | 507 – 565 HV0.3 |
Installation & Engineering Guide
To ensure optimal structural integrity and long-term waterproofing, please observe the following installation parameters:
- Recommended Drill Speed: 1500 – 1800 RPM.
- Pre-drilling: Not required. The chipless, thread-forming design ensures maximum thread engagement.
- Installation Angle: Always drive the fastener 100% perpendicular (90°) to the substrate.
- Torque Control: Use a torque-adjustable screwdriver. Do not over-tighten. When using an EPDM sealing washer, it should be slightly compressed to form a watertight barrier, but not extruded beyond the metal flange perimeter.
Typical Applications
Ideal for fastening thin sheet metals and securing heavy-duty components in demanding environments:
- Solar PV Systems: Securing roof hooks and aluminum rails to brackets.
- Metal Roofing: Trapezoidal, corrugated, and standing seam metal roofs.
- Cladding: Sandwich panel installations and facade engineering.
- HVAC Systems: High-vibration structural fixings.









